GEARBOXES EP SYN OIL

LUBRAL GEARBOXES EP SYN OIL

Synthetic extreme pressure lubricants of the highest quality, to be used in a wide array of industrial gears, both in simple friction bearings and non-friction bearings that make up enclosed transmissions operating in severe service conditions. They contain additives that provide antifriction and extreme pressure (EP) properties, high stability in oxidating conditions, and protection against corrosion; they are specifically designed to avoid “micropitting”.

APPLICATION

Enclosed gear systems requiring circulation lubrication; reducers; straight, conic, and helical gears; conveyer belt reducers; and wind turbines. Also recommended for equipment in severe operating conditions and located in a place that complicates frequent maintenance, as these oils provide longer draining times and better protection.

LUBRAL GEARBOXES EP SYN OIL

PROPERTIES	ISO 68	ISO 100	ISO 150	ISO 220	ISO 320	ISO 460	ISO 680
ID	1510446	1510447	1513599	1510445	1510573	1510575	1510735
ISO Grade	68	100	150	220	320	460	680
Color ASTM	0.5	0.5	0.5	0.5	1.5	2.0	1.5
Appearance	Bright	Bright	Bright	Bright	Bright	Bright	Bright
Kinematic Viscosity @ 40° C cSt	68	100	150	220	320	460	680
Kinematic Viscosity @ 100° C cSt	12	15	21	28	36	47	62
Flash Point COC °C	200	220	218	230	245	250	230
Pour point °C	-30	-30	-42	-30	-40	-30	-30
Copper strip Corrosion, 3 hrs. a 100°C	1b	1b	1b	1b	1b	1b	1b
Rust Test	Pass	Pass	Pass	Pass	Pass	Pass	Pass
Foam Tendencies ml, max.
Sequence I	25/0	25/0	25/0	25/0	20/0	20/0	20/0
Sequence II	55/0	55/0	55=	55/0	55/0	50/0	55/0
Sequence III	25/0	25/0	25/0	25/0	20/0	20/0	20/0

*Typical Characteristics are those obtained with normal tolerance of production and no constitute a specification.