LUBRAL Flush Clean Tech

  • Category: Oils
  • Application: Industrial
LUBRAL Flush Clean Tech  

This cleaning fluid is specifically designed to use along with hydraulic mineral oils.


Used as preparative for the replacement of oil loads in hydraulic systems, turbines, paper mill machinery, and cooling baths. We suggest keep a few new filters, because they will must be changed during the cleaning process. Filters must be monitored every 6 to 8 hours to replace them in the event of saturation. It is recommendable adding the cleaner in a turbulent part of the tank and not directly in the pump’s suction. Once the cleaning process is completed, the system must be drained entirely, rinsing and loading the new hydraulic oil of the LUBRAL CLEAN TECH product line, in order to obtain better results.

ID 2015077
Density @ 15.6°C, g/ml 0.9251
Kinematic Viscosity @ 40° C cSt 280
Kinematic Viscosity @ 100° C cSt 32.0
Flash point COC °C 86
Pour point °C -39
Technical Data Sheet Download
Safety Data Sheet Download
*Typical Characteristics are those obtained with normal tolerance of production and no constitute a specification.


Contact Us!

Visit us

Parque Industrial Gonher, Carretera a Garcia km 1.2, 66350 Santa Catarina, N.L.

Call us


Your message has been sent, Thank you!